PPG Full Coverage Ceramic Coated Honeycomb Saute Pan ANS01

分类: 品牌:

描述

ANS01 · 24–26 CMANS01 full-coverage ceramic honeycomb straight-sided sauté pan
ANS01 · PPG Fusion Edge Process

Full-Coverage HoneycombSauté Pan

ANS01 combines deep straight sides with a continuous PPG Fusion Edge ceramic topcoat across the complete stainless-steel honeycomb cooking plane—built for sautéing, shallow braising, sauces and one-pan meals.

  • Continuous full-coverage ceramic topcoat
  • Made without PFAS, PTFE and PFOA
  • Tri-ply stainless steel construction
  • 8 cm deep body for higher-capacity cooking
Available sizes

Selected: 24 × 8 cm · Model family ANS01

B2B manufacturing inquiry · OEM and ODM configurations available

Full-CoverageContinuous topcoat
PPG ceramicFusion Edge system
8 cm deepStraight-sided cooking body
24–26 cmTwo sauté pan sizes
Application demonstration

See full-coverage release in use.

A practical demonstration for buyer presentations, distributor meetings and private-label product development. Final performance statements are aligned with the approved coating, body thickness and test protocol.

Cooking results depend on heat, oil, ingredients, care and the confirmed production specification.

PPG Fusion Edge primer and topcoat process for full-coverage honeycomb cookware
01 · FULL-COVERAGE SYSTEM

PPG Fusion Edge covers the complete honeycomb cooking plane.

The process applies primer, polishes the structured surface, then seals the complete cooking plane with a continuous sol-gel ceramic topcoat. The final layer extends over the raised honeycomb structure instead of leaving polished steel peaks as exposed cooking-contact points.

  • Primer target: 25–35 μm
  • Fusion Edge topcoat target: 10–15 μm
  • Final cure: 280–300 °C for 10 minutes
No exposed metal cooking points

From polished metal peaks to a continuous non-stick surface.

The two close-ups explain the difference clearly: the untreated structure leaves bright metal ribs exposed, while the full-coverage version places a continuous transparent ceramic film across the complete honeycomb geometry.

Honeycomb surface with exposed polished metal ribs

Traditional exposed metal structure

Polished stainless-steel ribs remain visible at the cooking surface and can create direct metal contact points.

Transparent ceramic film covering the full raised honeycomb structure

Full-coverage ceramic film

The transparent visualization shows the topcoat spanning both recessed cells and raised ribs as one continuous food-contact layer.

Egg release comparison

Visible sticking on exposed honeycomb. Cleaner release with full coverage.

The side-by-side cooking photos illustrate how the surface system can affect egg release. Results depend on preheating, oil, temperature, ingredients, utensil technique and the confirmed production specification.

Egg sticking on a traditional exposed-honeycomb pan

Traditional honeycomb

Egg residue remains on the cooking surface

The demonstration shows tearing and visible residue during removal from a conventional exposed-honeycomb surface.

Egg releasing from a full-coverage ceramic honeycomb surface

Full-Coverage Honeycomb

Egg lifts from the continuous ceramic surface

The full-coverage demonstration shows the egg lifting with less visible residue under the documented cooking conditions.

ANS01 straight-sided sauté pan fast and even heat distribution
02 · DEEP STRAIGHT-SIDED BODY

More usable capacity with controlled, even heat.

The 8 cm straight wall gives buyers a versatile format for sautéing, shallow braising, reducing sauces and one-pan meals. The tri-ply stainless-steel body carries heat from the base into the sidewall while the deeper profile helps contain ingredients and splatter.

  • 24 cm and 26 cm diameter options
  • 8 cm depth for higher-volume cooking
  • Induction, gas, electric and ceramic compatible
Surface engineering

Honeycomb strength without bare-metal gaps.

The steel structure supports scratch resistance while the transparent ceramic topcoat creates a continuous food-contact surface. This addresses sticking and edge-peeling risks associated with exposed polished peaks.

PPG Fusion Edge full-coverage coating system over a honeycomb stainless-steel substrate
Multi-stovetop compatibility

One sauté pan body for the major cooking systems.

The magnetic stainless-steel exterior supports induction cooking, while the tri-ply body distributes heat across gas, electric and ceramic cooktops. Final compatibility and oven temperature are confirmed with the selected handle and production specification.

IND

InductionMagnetic exterior

GAS

GasDirect flame

ELEC

ElectricCoil or solid plate

CER

CeramicFlat glass cooktop

ANS01 ceramic coating made without PTFE PFAS and PFOA poster
Food-contact documentation

Made without PTFE, PFAS and PFOA.

The proposed PPG Fusion Edge ceramic coating system is supported by a PPG food-contact assurance letter covering the named primer and clear topcoat. Final product claims remain tied to the confirmed coating batch, stainless-steel substrate and production process.

PPG Assurance LetterCS1501306 · issued 24 Dec 2025
Fusion Edge coating codesN217795 / 80-688 primer · N217796 / 80-689 clear topcoat
US FDA referencesFCN 2356 · TOR 2014-002 · 21 CFR 178.3297
EU food-contact frameworkEC 1935/2004 · LFGB safety requirements referenced

The assurance letter applies to the specified coating system and expires one year after issue or earlier if regulations change. Final-article migration and destination-market testing may still be required.

Utensil contact over a raised honeycomb cookware surface
Visible durability benefit

Raised honeycomb geometry helps shield the coating from utensil contact.

The stainless-steel structure takes part of the direct contact load while the PPG Fusion Edge topcoat maintains a continuous cooking surface. Abrasion performance is confirmed against the selected construction and test protocol.

  • Raised structure reduces broad utensil contact with the recessed coating plane
  • Full-coverage topcoat avoids deliberately exposed cooking-contact peaks
  • Adhesion and abrasion evidence can be supplied for confirmed production samples
Validation for demanding use

Durability, dishwasher and corrosion performance.

These supplied validation visuals summarize the program’s dishwasher, saltwater, temperature and coating-adhesion positioning. Test claims and cycle counts apply only to the referenced samples and methods.

ANS01 sauté pan durability dishwasher corrosion and adhesion positioningPPG Fusion Edge anti-corrosion dishwasher temperature and adhesion performance data

`r`n

Program sizing

One model family. Two deep sauté pan sizes.

Choose the compact 24 cm format or the higher-capacity 26 cm format for retail, distributor and private-label cookware programs.

03 · SIZE RANGE

24 cm and 26 cm. Both with 8 cm depth.

Both sizes retain the same ANS01 full-coverage honeycomb story. Handle, lid, body thickness, packaging and market-specific claims are confirmed per project.

Diameter Depth Suggested program role
24 cm 8 cm Compact sauté and shallow-braising pan
26 cm 8 cm Family-size sauté pan for one-pan meals
ANS01 full-coverage straight-sided sauté pan size family
Product information

Specifications and OEM options.

Core specification
  • Model family: ANS01
  • Nominal sizes: 24 × 8 cm and 26 × 8 cm
  • Body: tri-ply stainless steel with aluminum core
  • Cooking surface: stainless-steel honeycomb structure with full-coverage ceramic topcoat
Coating and process
  • PPG Fusion Edge sol-gel ceramic system
  • Made without PFAS, PTFE and PFOA
  • Primer, polish and continuous topcoat process
  • Exact film thickness and cure profile confirmed with the production specification
OEM and ODM options
  • Diameter, lid, handle, body thickness and exterior finish
  • Logo application, color and packaging development
  • Set building with sauté pans, milk pans, soup pots and woks
Testing and documentation

FDA, EU food-contact, dishwasher, abrasion, corrosion and temperature documentation is supplied according to the confirmed coating, body, handle and destination-market specification.

Buyer FAQ

Questions sourcing teams ask before sampling.

Answers are framed for OEM, private-label and distributor discussions rather than consumer lifetime guarantees.

What makes ANS01 different from a standard honeycomb sauté pan?

Traditional polished honeycomb pans commonly leave raised steel peaks exposed. ANS01 applies a continuous ceramic topcoat after polishing so the honeycomb structure and raised peaks are sealed under the final food-contact layer.

Which sizes are available?

The straight-sided sauté pan family is available in 24 × 8 cm and 26 × 8 cm. Buyers can select either size or combine both in a coordinated range.

Is the coating made without PFAS and PTFE?

The proposed PPG Fusion Edge sol-gel ceramic system is positioned as made without PFAS, PTFE and PFOA. Final packaging statements must match the approved coating batch and destination-market documentation.

Is the pan dishwasher safe?

Dishwasher testing and care guidance are available for confirmed configurations. The final claim depends on the selected coating, handle, rivets, exterior finish and test sample.

Which stovetops are supported?

The tri-ply stainless steel body can be specified for induction, gas, electric and ceramic stovetops. Oven temperature depends on the handle, lid and coating configuration.

Can we customize the product for our brand?

Yes. OEM and ODM options include diameter, thickness, handle, finish, color, logo, packaging and cookware-family extension. Sampling aligns the performance claims and documentation with the final construction.

Start a cookware project

Build an ANS01 full-coverage sauté pan program.

Share your target sizes, market, quantity, price position and customization requirements.

Request a quotation

评价

目前还没有评价

成为第一个“PPG Full Coverage Ceramic Coated Honeycomb Saute Pan ANS01” 的评价者

您的邮箱地址不会被公开。 必填项已用 * 标注